Here is a list of frequently asked questions (FAQ) about common problems related to DTF powder glue, along with their answers:

What are the common problems associated with applying DTF glue?

Common problems include poor adhesion of the printing powder, irregularities in the application of the glue, and difficulties in fixing the glue to the surface of the item.

Why does the printing powder not stick properly after applying DTF glue?

Several factors can contribute to this problem, including insufficient surface preparation, incorrect application of the glue, or the use of poor-quality products.

How can I improve the adhesion of the printing powder to the DTF glue?

Make sure you prepare the surface of the item properly by cleaning it before applying the glue. Also make sure you apply an even layer of glue and respect the recommended drying times.

What should I do if the DTF powder forms lumps or irregularities during application?

If you encounter lumps or irregularities in the DTF powder, it is recommended that you filter the glue before applying it to remove unwanted particles. Also make sure that the applicator used is clean and in good condition.

How can I solve problems with fixing DTF glue to the surface of the item?

Make sure you use sufficient heat and pressure when fixing the glue with an iron or heat press. Also make sure you follow the manufacturer's instructions regarding temperature and fixing time.

What should I do if the DTF glue comes off the surface of the item after printing?

If the glue comes off after DTF printing, this may indicate a problem with the application or fixing of the glue. Make sure you follow the steps for applying and fixing the glue carefully to ensure optimal adhesion.

How can I avoid unwanted glue smudges or stains on the printed item?

To avoid glue smudges or stains, make sure to apply the glue evenly and in the appropriate amount.

Use applicators that are suitable for the size and shape of the item's surface for optimal control.

What cleaning products are recommended to prepare the item's surface before applying DTF glue?

Mild solvents such as specially formulated isopropyl alcohol are often recommended for cleaning and degreasing the surface of the item before applying DTF glue. Be sure to check the compatibility of the solvent with the material of the item.

By following these answers to frequently asked questions, you can solve many common problems related to the application of DTF glue and improve the quality of your prints. If you encounter persistent difficulties, do not hesitate to contact the technical support of your DTF glue supplier for additional assistance.

If you would like to learn more about DTF powder, check out our comprehensive guide on the subject available on our blog: Comprehensive guide to DTF powder.